The specialised company carries out building of hangars and warehouses. The information on the building materials, the necessary equipment. Data on warehouses and hangars.

Glass tonirovannoe in weight

Represents transparent plavlenoe the colour glass made on float-technology. Colour steals up addition oksidov metal in steklomassu in fusion process. Glass of this type possesses high light-absorbing ability, and its reflecting properties it is less, than at a usual transparent windowpane. For glass, tonirovannogo in weight, pleasant soft light as outside, and in a building, thus light reflexion – weak is characteristic, and protection against sunlight results from solar energy adsorption.

Primary colours of toning – bronze, grey, green, dark blue and their shades. It is necessary to pay attention, that colour tonirovannogo in weight of glass depends on its thickness.

Application tonirovannogo glasses – a glass cover of show-windows, windows and doors, manufacture of double-glazed windows, tselnostekljannye facades and dividing interroom partitions, furniture from glass, table-tops, shelves and doors.

Decorative toning

Traditionally decorative toning of glasses is made by special coloured films with various degree of a transparency and reflecting ability. Toning of glasses by films has received wide application for cars and window systems in building. One of the basic operational characteristics of films – factor propuskanija for ultra-violet, visible and infra-red radiation. Often enough films use not so much for decorative effect, how many for protection and safety increase.

In the centre of Moscow the billiards shop «Classics of Russian Billiards» is located. On a site of the given shop it is possible to familiarise with the catalogue of billiard tables and cues.

Having read weight of articles, having talked to friends, having consulted to neighbours, you have solved … are not present, not to change a window or to glaze a loggia, meanwhile – only to learn, in how many to you it will manage.

New plastic windows can manage to you in much bigger money, than you estimated, reading various handbills and joyfully multiplying the price specified there for the area your window and doorways. Yes, there will be specified at first sight quite comprehensible prices for plastic windows (for example, from 60 dollars for square metre), moreover there will be many additional pleasant phrases (free gaugings, free delivery, free installation, free plaster of slopes, a gift from firm, a guarantee of 50 years, and so on – five pages in “Ekstra Th”, twenty five – in a weekly journal “Arrangement and repair”).

As to involve the buyer it is possible only the price, manufacturers and sellers usually specify floor price of plastic windows, thus consider only the product price, “forgetting” about accessories (window sills, otlivy and elements of their fastening), about fixing and constructive elements (podstavochnyj and a broad profile, ankernye bolts and plates), about gaugings, delivery, dismantle and installation of plastic windows.

Definitively to orient probably only after full obscheta all order for plastic windows taking into account all necessary works, without having forgotten thus such unexpectedly and things inevitably emerging subsequently, as “lifting on a floor” on delivery and “garbage removal” after dismantle of plastic windows.

Actually the price for plastic windows (with other things being equal) depends only on two factors: from a material of manufacturing of plastic windows (aluminium, plastic or an eurotree) and from mark of used profiles and accessories (KBE, REHAU, VEKA, WINKHAUS, ROTO, MAKO, SIEGENIA).

Plastic windows from a plastic profile unequivocally are cheaper than wooden eurowindows similar on a configuration (I do not mean simple wooden frames which can be got rather cheaply in any market of building materials), and is much cheaper than plastic windows from “a warm” aluminium profile.

The trade mark of an import plastic profile on plastic windows of middle class (KBE, REHAU, VEKA) not so is strongly reflected in the product final price, as its configuration (quantity of shutters, impostov, double-glazed window type).

Spadework is to begin with conducted. To make a plate the corresponding form in which it will fill in – a timbering is required. Depending on what part of a building is required to be prepared, the drawing in advance should be created. You should know exact height of apertures, length and width of the panel. Usually at panel factories pour on a metal flooring. If the equipment is prepared properly the flooring comprises vibration and heating function as concrete will better and more qualitatively seize under the influence of vibration.

So, we will begin. The first business is greased by technical oil a metal flooring that the form could be taken out easily from a flooring, and wasn’t created additional conditions for formation of cracks. Well polished surface is necessary for quality of the received material, if the surface has already been used under a gulf to polish better with the Bulgarian, shpatel is a little effective. Further on each side, proceeding from the sizes, we put the wooden whetstones, all cracks it is closed up tserezitom or shpaklevochnym by a material. The second stage – is put armaturnaja a lattice which length see on 15-20 less than length of a plate. On each side armatures through everyone 25 see cuts kusachkami for an insert of aluminum boxes with loops become. To armaturnoj to a grid wide pipes, ganders, from below and narrow from above rigidly tie up. Along the future plate, from top to down, lasts the electrician. A plastic tube with a socket under the socket. If it is not required additional apertures: Windows and doors, – that the form is ready to pouring. It is necessary to fill in quickly, it is desirable with application of the vibrating pump. On the Finnish technology a design pour vertically, it is used an order of 20 forms which are filled in simultaneously, with fastening of shutters of the device by the dynamic piston. After pouring end drive in iron rods in length 50-60 see, and for plate transportation, to its top part are established to steam of thick hooks for which the crane can lift a design. In six hours, at good heating, concrete will dry up.

For warming and zadelki possible holes in a design can use glass wool. For fastening of apertures, for example, a window, magnets with good coupling use. Magnets are established from within an aperture, with a certain prop. If concrete pours down a prompt stream, it can deform a surface, for this reason the aperture should be strong and strictly correspond to the sizes.

On dish preparation under the name the plate, lateral wooden whetstones of a timbering are taken out by a breakage and a hammer. Operation has passed successfully.

Popular on a blog:

What water to drink?

Difference of septic tanks the Topaz and Junilos

Councils to stove-makers

Drainage the hands

Mentioned by me earlier “Association of Building Power effective Technologies. Conference for open discussion” has opened to me eyes on life, literally. There is everything that I warmed, all did incorrectly. Minvatu it is necessary to separate from an external wall a waterproofing, and from internal facing paroizoljatsiej. All these of “isolation” in the form of films with certain characteristics for prevention skaplivanija a moisture in thickness minvaty because of condensate formation that, first didn’t worsen teploizolirujushchie characteristics minvaty, and secondly, for prevention of occurrence of a fungus. I think, repair – the phenomenon permanent, therefore next time all I will make on a science: =)

As remember, it is necessary to fill in all for a day, and it imposes the trace on how quickly it is necessary to take away all.

The matter is that after will bring concrete, it should be taken away somehow on the area 14х14. It is good, if the entrance to a platform is from the different parties then is easier, simply to throw out concrete in different parts of the base both any board and shovels it to carry (there would be hands), but at me the mixer can approach on the base only on the one hand … That it was possible to approach from other parties, it is necessary: to kill neighbors or at least to convince them that their site which has been plowed up by healthy wheels in a dirt many is more attractive, than well-groomed, set with florets and any trees, and the fence has got out of fashion now. The second – nakidat a heap of building dust on perimeter, differently business the pipe, all the same will get stuck a mixer … In this connection we look how much rent betononasosa.

Coming back to imperious questions … Now on the summons in the world – the next overthrow of the current authorities, Tunis there, now here Egypt.

Well and our tandem has to some extent become agitated, as during an epoch of “orange revolutions”. Extremely informative lecture of orientalist A. Lankova where he in general speaks such rather interesting things about the power here has got to me:

“In general, any government is compelled to answer one question which to it constantly sets the people. A question this idle time:« And by what right you correct us? »That is it is necessary to prove constantly the right to a country government, it is necessary to speak:« I am a duly elected president; I am a son of the sky; I am a secretary general of party which knows only correct doctrine (that that is omnipotent because it is true) ». It is legitimacy, and when such legitimacy, the right of the power recognized as the people to operate, exists to endure an economic crisis, in general, it is possible. Well, well, gross national product has fallen there, unemployment has sharply grown, it all the same not an occasion to arrange revolution.« After all in power in public selected president or the present son of the sky at whom and the sky mandate is. Means, we need to suffer a little bit, and all will settle into shape ». More often and occurs.

And here feature here these two last «development dictatorships», China and Vietnam is that they are, I would tell, a bicycle. That is they are politically steady only so far as as they go as high economic growth is kept. On a question «that you there, at fed the authorities, do?» The present Chinese management can answer only one (and, by the way, it is absolutely fair): «We don’t know, by what right we here, at fed, we sit, but we here have appeared for the historical reasons, and now at us here so all well turns out!» A problem that the modern Chinese society in all this decorative Marxism-Leninism doesn’t trust on a penny. But as in power all turns out improbably well, stability in the country exists.

At us, basically, naverhah just the same situation. Gross national product has received the board mandate as a suppressor of the Chechen Republic. About any sincere will and speech wasn’t. But the people have agreed with a sad sigh – “Let this. Only held abrekov in a bridle and us especially didn’t touch”. Further there were seven corpulent years and here on the Kremlin roads the tandem-bicycle already slides. Legitimacy at it exactly same, as well as in China and Vietnam. The horse-radish knows for what such historical reasons undertook, but something though turns out. While slides – suffer. The public arrangement of the people with the power.

Has established a program, to the father-in-law.

It is ambiguously read, well it is fine.

Posted via LjBeetle

The question with kitchen has moved. Today went in Foremu and have ordered facades and a different trifle. Facades have chosen colors “alder”. Promised to make about December, 3rd.

Self-regulation in the field of engineering prospecting activity (SRO researches) has been entered into Russia from the beginning of 2009, having replaced with itself of licences for engineering researches. Etoznachit that for realisation of civil work in the field of engineering prospecting activity in territory of our country to the organisations is necessary to be members of the self-adjustable organisation (SRO researches).

The self-adjustable organisation in the field of engineering researches (SRO researches) in it the noncommercial organisation data about which are brought in the state register of the self-adjustable organisations based by membership of individual businessmen and legal bodies, carrying out activity in the field of engineering researches.

Certificates of regulation SRO of research:

1. The civil code of the Russian Federation from November, 30th, 1994 №; 51-FZ

2. The town-planning code of the Russian Federation from December, 29th 2004; №; 190-FZ

3. The federal law from December, 1st 2007; year №; 315-FZ “About the self-adjustable organisations”

4. The federal law from January, 12th, 1996 №; 7-FZ “About the noncommercial organisations”

SRO researches should correspond to a number of requirements:

1. Its structure should include not less than 50 professional participants of the design market (jur. Persons, individual businessmen, the foreign organisations, certified in the Russian Federation).

2. The partnership should create and confirm positions enterprise and professional work obligatory for performance by all members SRO of research.

3. The partnership should generate an indemnification fund the minimum size which should be not less than 500 thousand roubles on everyone receiving status SRO of research. At insurance by members of partnership of a civil liability before the third parties, minute the size of an indemnification fund should be not less than 150 thousand roubles on each member of partnership.

4. The noncommercial partnership should undergo procedure of reception of status SRO in the authorised state structure. The authorised state structure under condition of conformity of partnership to the shown requirements for reception of the status prospecting SRO brings the information on Noncommercial partnership with assignment of status SRO in the state register of the self-adjustable organisations (SRO researches).